Six pack hood measurements

[dgully]

Hey guys, iam about to install my six pack hood scoop and curious if anyone has a measurement from the back of the hood to the back of the scoop. 69 Dart hood

 

[LocuMob]

If it's the same as a Hemi scoop I can get you measurements when the grandkids go home.

 

[dgully]

I guess iam not sure if they're the same but it would give me a start. Thank you

 

[LocuMob]

No problem

 

[brian6pac]

Measure from the cowl to the air cleaner stud and from fender to stud on both sides and then put a dot on the hood and that will give you a center place to start.

 

[LocuMob]

Ok took me way longer than I thought. Here are the measurements I got off my US Body Source Hemi scooped hood.

I got anywhere between 2 3/4 and 3 inches depending on how I was holding the tape measure. Doesn't help that my storage place doesn't have a light that works. But the top and bottom, or driver's and passengers side measure the same so the middle is irrelevant. I hope this helps you figure it out.

 

[dgully]

That will work , thanks for the pictures