Hey guys, iam about to install my six pack hood scoop and curious if anyone has a measurement from the back of the hood to the back of the scoop. 69 Dart hood
Measure from the cowl to the air cleaner stud and from fender to stud on both sides and then put a dot on the hood and that will give you a center place to start.
Ok took me way longer than I thought. Here are the measurements I got off my US Body Source Hemi scooped hood.
I got anywhere between 2 3/4 and 3 inches depending on how I was holding the tape measure. Doesn't help that my storage place doesn't have a light that works. But the top and bottom, or driver's and passengers side measure the same so the middle is irrelevant. I hope this helps you figure it out.