[WANTED] Slant Six Bolts Needed

[Walt Jackson]

Does anyone have the following bolts for for sale for a 1968 225 slant six:
1. valve cover bolts
2. timing case cover bolts
3. oil pan bolts
4. any other bolts to complete assembly.

TIA

--Walt Jackson

 

[PROSTOCKTOM]

Probably be better if you posted it in the Wanted section. Not the For Sale section.

Tom

 

[65 Dartman]

I pulled apart a 74 block and saved all the hardware. The hardware looks the same as from my 65 motor

 

[cudamark]

Where are you located?

 

[Mysons68dart]

Does anyone have the following bolts for for sale for a 1968 225 slant six:
1. valve cover bolts
2. timing case cover bolts
3. oil pan bolts
4. any other bolts to complete assembly.

TIA

--Walt Jackson

I believe I have the studs washers. And nuts to attach the intake. And exhaust manifolds to the head.
I'm Going Out to my shop in a little while To check, let me know if these are something you need
Gary.

 

[Walt Jackson]

I pulled apart a 74 block and saved all the hardware. The hardware looks the same as from my 65 motor

The shop that started work on my slant six "lost" ALL the nuts and bolts, from the pan to the valve cover. I have the hard parts, but not the fasteners. I'm in Phoenix, AZ. Would be delighted to take whatever you have, and pay your price. I need to complete this project. Thanks, Walt Jackson

 

[cudamark]

I have an NOS set of intake/exhaust hardware if you're interested in that.