[WANTED] Slant Six Spark Plug Tubes

[volken65]

Need to replace all six. All six are wallowed out and won't seal.

 

[DCAspen]

Did you have the rubber seals on the ends?

 

[JoeSBP]

as in the plug won't seal, or the tube won't seal to the head?

 

[volken65]

The tube wont seal to the head. My tubes look worse then the attached image.

 

[JoeSBP]

You can scrounge around here or eBay for a used set, or you can order these beauties from the Aussies..

Spark Plug Tube (Machined Aluminium) : suit Slant 6

 

[volken65]

You can scrounge around here or eBay for a used set, or you can order these beauties from the Aussies..

Spark Plug Tube (Machined Aluminium) : suit Slant 6

Those Aussie tubes are very nice

i check the bay every while but have never seen a set come up.

 

[RAT ROD AL]

Need to replace all six. All six are wallowed out and won't seal.

I think I can scrounge you up six if you still need them. I'll have to check and make sure they're not bad also. let me know. AL.

 

[volken65]

I think I can scrounge you up six if you still need them. I'll have to check and make sure they're not bad also. let me know. AL.

Yes, i'll take any good ones you might have. Thanks

 

[RAT ROD AL]

Yes, i'll take any good ones you might have. Thanks

I have 6 good ones I can send you. P/M coming

 

[pishta]

Good man there. DrDodge over on slantsix should have them too.

 

[bruceo2011]

The tube looks like the crush ring wasn't removed from the sparkplug.

 

[RAT ROD AL]

The tube looks like the crush ring wasn't removed from the sparkplug.

So your saying when you put new plugs in a/6 you should remove the ring on the new plug?

 

[bruceo2011]

YES - on the slantys that use the tubes.

 

[RAT ROD AL]

YES - on the slantys that use the tubes.

Thanks I didn't know that.

 

[bruceo2011]

75 and up heads don't have the tubes and you don't remove the crush sleeve on those plugs. There are threads out there about this topic.
Slantsixdan is the guru on this.