slant turbo selection

[vitamindart]

ok, we are looking for some help with selecting a Turbo for our slant.
here is what we have and what we are thinking.

re ringed slant short block (milled .110 kid had it milled before we went turbo)
erson 265 dur cam. ported head , aussie intake.

we are thinking a low boost (8 to 15psi) with the raised compression should work well.
now from what we have read the PTE 6262 or GT35R work well on the stock compression slants. should we use a different turbo because of our
lower boost goals? or will it work fine?

let me know what you guys think..

Thanks!

 

[RustyRatRod]

I bet this will work good.

 

[Shaker223]

Use a stock 87 Buick turbo. Cheap and reliable.

 

[racerhog]

I'm looking at this build !!!!!!!!!

 

[replicaracer43]

Post #2 while funny, doesnt help...........:wack:

 

[vitamindart]

i think i would need two of those turbos fromthe second post....Twins!!!

 

[Bill Dedman]

Post #2 while funny, doesnt help...........:wack:

"Use a stock 87 Buick turbo. Cheap and reliable."

Excellent advice...
My 2-cents worth.:cheers: