small block 73&up to bb conversion mounts needed

[74fldart]

hello guys im looking for the mounts to put a big block into my 74 dart that has a v8 kframe in it. pm me if any one can help, thanks

 

[Jim Lusk]

Those mounts require cutting the driver side saddle and drilling a new hole for the through-bolt. Why don't you go over the www.bigblockdart.com adn look at the tech pages for making your own DC k-member and buy some 74-78 passenger car factory big block mounts. You'll be money ahead if you can weld it (or have a friend who will).

 

[74fldart]

ill check it out thanks

 

[tfie93]

Try http://www.engine-swaps.com/
they sell the conversion kit for your project.

 

[Dusteriffic]

Those mounts require cutting the driver side saddle and drilling a new hole for the through-bolt. Why don't you go over the www.bigblockdart.com adn look at the tech pages for making your own DC k-member and buy some 74-78 passenger car factory big block mounts. You'll be money ahead if you can weld it (or have a friend who will).

I thought only the /6 k-members required that hole?

 

[Jim Lusk]

Nope. The small block k-member needs to have the driver side saddle cut shorter and new hole drilled. This is for oil pump clearance and the reason the factory couldn't just make a mount to fit.