small block crankshaft pulley

[belmateo]

I need a lower crank pulley for an A motor 1964-1969. Approx. 7" diameter

 

[dusterdood]

I've got a box full of pulleys. How many grooves? How deep?
Mike

 

[belmateo]

2 grooves 1 1/8" from face of balancer to rear edge of pulley

 

[dusterdood]

I've never seen a one inch pulley. Sorry I can't help you.
Mike

 

[belmateo]

thanks for trying, these are the standard bottom pulleys on all 273,318 and 340 up to 1969.

 

[jimbo]

I have one $35 plus shipping.

 

[belmateo]

pass

 

[physixx]

I've got a 3 groove one if you could use that. The inner 2 grooves measure just under 7 1/2" and is 1 1/8" from the balancer face to the inner edge of the inner groove.

Ken
Edison, NJ

 

[EvilScamp]

I have a couple 2 groove one's with the single groove one for the fan.

 

[Bea]

I've got a box full of pulleys. How many grooves? How deep?
Mike

Need just 1 - 7" (2 Groove) Pulley for Crankshaft...installing Underdash A/C.

Fits: 1962 Dodoge Lancer 225 or 170 will work

 

[Bea]

I have a couple 2 groove one's with the single groove one for the fan.

Need just 1 - 7" (2 Groove) Pulley for Crankshaft...installing Underdash A/C.

Fits: 1962 Dodoge Lancer 225 or 170 will work

Thanks, Bea