[FOR SALE] Small block Mopar 340 racing headers

[Michael Frick]

SORRY these are for an E-Body if anybody sees a need for them. For a 1970 Plymouth 340 Cuda unless they can be modified to fit an A-Body. My mistake.

For sale - set off small block Mopar 340 racing headers. Never been on an engine. Sandblasted, painted high temperature primer, high temperature black, and high temperature gloss. Have had for 36 years, had kids, stopped racing, never put on a car, here they are.

Fit a 1970 Plmouth 340 Cuda.

$500 for the pair, you will have to provide means of shipping or pickup.

Located in Erie, Pennsylvania.

 

[SSG_Karg]

Got a brand name or a part number?

 

[Garrett Ellison]

Primary size and are those 3-1/4 inch collectors?

 

[Bigboy 68]

What car do they fit?

 

[Michael Frick]

Primary size and are those 3-1/4 inch collectors?

I put a tape next to them for reference, looks like 3 1/4". Took a set of digital calipers and primary tubes measured 1.9".

 

[Michael Frick]

What car do they fit?

What car do they fit?

340 Plymouth Cuda. I forgot to add that. Sorry, will edit post.

 

[Michael Frick]

Got a brand name or a part number?

Only part number I could find was a stamped 4216 on one flange.

 

[RedB.]

340 Plymouth Cuda. I forgot to add that. Sorry, will edit post.

what year Cuda ?

 

[rumblefish360]

Standard or W series head?

 

[Michael Frick]

what year Cuda ?

1970 Cuda

 

[Michael Frick]

Standard or W series head?

Should be standard "J" head I think. Actually bought them before the W2 heads came out.

 

[RedB.]

what year Cuda ?

sorry E body lol i need to read a little more closely

 

[Michael Frick]

sorry E body lol i need to read a little more closely

No my bad. I was cross posting and need to take this post down as it is an E Body not an A Body. Sorry.

 

[69FBCuda]

No my bad. I was cross posting and need to take this post down as it is an E Body not an A Body. Sorry.

Leave the post up, we don't mind seeing how the E-ther half lives

 

[MAPS]

Mike

I found this about these headers...

Competition headers. These are a pair of 1 3/4 tubes with a 3" collectors and extensions.I was told they were JR headers which sold to Hedman Headers a number of years ago. The part # was identified as 4216.
An old JR catalog identifies them for the 1967 To 74 B & E body cars.

They looked like the ones you have hope this helps..
wereIf they for an A Body, I'd be interested.

MAPS