small block radiator measurement help!

[69 Valiant Kid]

alright, im ordering one of mancini racing customer radiators(i hope it fits betetr than their p/s bracket) and they wanna know how far in do the inlet and outlets have to be on the radiator. i have a 69 valiant but it has a '72 340. the top(outlet) is on the drivers side and the bottom(inlet) is on the passenger side. can i tell them to just put the inlet and outlets in the far corners or what? thanks for the help guys?

 

[valentek]

Not a lot of help here, but do not tell them to put them in the corners.
I have a 69 Barracuda with SB, and top driver/bottom passenger side hookups.
The bottom passenger side hose was hitting the strut rod bolt, with a 72 radiator. So make sure that the passenger lower is moved in for sure, I think the driver upper would be fine.

On my Wizard Cooling radiator, I have the passenger side lower in about 2 1/2 - 3 inches, and it has plent of space. It is dark now, so maybe if no one answers, I can messure it tomorrow.

valentek
69 B5 408 FB

 

[69 Valiant Kid]

hey, thanks valentek, i figured id move them in 3-4 inches on the top and bottom...