[SOLD] small block stroker pistons

[Ramcharger8314]

I have a brand new set of JE forged lightweight domed pistons, pins, spirol locks for a small block Mopar. These are lightweight pistons they weigh 482 grams each pins weigh 128 grams each for a total with pin 610 grams. These have a 14.5 CC dome volume. These are a 4.06 bore with a .927 pins 1.200 compression height stroker pistons. These could be used with many different combinations using a 340 or 360 block or a race block using a 4.00 4.125 or 4.250 stroke crank with longer rods like 6.200 or 6.300 rods. These are a great deal much cheaper than what I paid for them over 900.00 dollars save a lot buying mine if you are building a big stroker race small block Mopar. Pistons are located in Shallotte NC. I will take PayPal if you pay the 3 percent or a Postal money order or cash in person. 400.00 plus 25.00 dollars shipping in the lower 48 states.

 

[1320duster]

300$

 

[mikedevore]

Do you have a part number?

 

[Ramcharger8314]

The part number is 267836 job number is 617544. I could do 375.00 shipped in the lower 48 that would be my very bottom on these. Thanks. Darren

 

[345man2]

what specific rod length and stroke are they made for

 

[Ramcharger8314]

Pistons are SOLD!!