CultClassik
Well-Known Member
Contact seller
Located in DFW, TX. Prices do not include shipping. Reasonable offers considered especially on multiple items.
2.25” stainless exhaust clamp (band, pipe to pipe) pair $SOLD
2.25” stainless exhaust clamp (lap, pipe to muffler) pair $SOLD
Erson Chrome Small Block Valve Covers $SOLD
HEI kit, includes Accel 50k volt coil, GM HEI module and diet connector - plug and play if you have a factory elec dizzy! $SOLD
73-76 A Body Upper Arms (BBJ) with new Moog ball joins and bushings, I bought them like this and didn't end up using them $SOLD
Mopar Performance Super Stock leaf springs, used in a drag car for a couple of years. These are the L and R springs rated for the lighter body (3200lb?) . Will look at them to confirm part numbers. Includes good bushings, hangers, shackles and longer Mopar Perf shocks, everything required. $150
Holley Inlet w/fuel pressure gauge port, new $15
Edelbrock/Carter fuel inlet line w 3/8” fitting, barely used $15
Comp Cams timing chain for SB Mopar, new (not a double roller like the box shows, it's a standard chain) $20
Dr Diff proportioning valve, new $30
Unknown brand lower ball joint new k781 (73-76 a body, disc) $20
2bbl Carter carb from 67 273 engine (reduced) $20
2bbl air cleaner from 67 273 engine $20
MOOG NOS lower ball joint K785 (62-72 A Body, drum) $25
Remco NOS lower ball joint K785 (62-72 A Body, drum) $25
Unknown brand Hooker style small block A body headers, not bashed in but somebody messed with one of the tubes as shown (see red marker), some weld glob on it. I will throw in a pair of collector stubs, new collector gaskets, and collector bolts (reduced) $90
2.25” stainless exhaust clamp (band, pipe to pipe) pair $SOLD
2.25” stainless exhaust clamp (lap, pipe to muffler) pair $SOLD
Erson Chrome Small Block Valve Covers $SOLD
HEI kit, includes Accel 50k volt coil, GM HEI module and diet connector - plug and play if you have a factory elec dizzy! $SOLD
73-76 A Body Upper Arms (BBJ) with new Moog ball joins and bushings, I bought them like this and didn't end up using them $SOLD
Mopar Performance Super Stock leaf springs, used in a drag car for a couple of years. These are the L and R springs rated for the lighter body (3200lb?) . Will look at them to confirm part numbers. Includes good bushings, hangers, shackles and longer Mopar Perf shocks, everything required. $150
Holley Inlet w/fuel pressure gauge port, new $15
Edelbrock/Carter fuel inlet line w 3/8” fitting, barely used $15
Comp Cams timing chain for SB Mopar, new (not a double roller like the box shows, it's a standard chain) $20
Dr Diff proportioning valve, new $30
Unknown brand lower ball joint new k781 (73-76 a body, disc) $20
2bbl Carter carb from 67 273 engine (reduced) $20
2bbl air cleaner from 67 273 engine $20
MOOG NOS lower ball joint K785 (62-72 A Body, drum) $25
Remco NOS lower ball joint K785 (62-72 A Body, drum) $25
Unknown brand Hooker style small block A body headers, not bashed in but somebody messed with one of the tubes as shown (see red marker), some weld glob on it. I will throw in a pair of collector stubs, new collector gaskets, and collector bolts (reduced) $90