May 28, 2007 #1 R razorback Well-Known Member Joined May 20, 2007 Messages 171 Reaction score 0 will a tq convertor from a cast crank 318 work with a 360 engine?
May 28, 2007 #2 V valiant360 Well-Known Member Joined May 5, 2007 Messages 89 Reaction score 0 Location north east oklahoma You either need an externally balanced converter, or a B&M flexplate.
May 28, 2007 #3 R razorback Well-Known Member Joined May 20, 2007 Messages 171 Reaction score 0 can you reccomend a flexplate? i dont want to upgrade convertors now which is why i ask. a stock one is fine (stock motor)
can you reccomend a flexplate? i dont want to upgrade convertors now which is why i ask. a stock one is fine (stock motor)
May 28, 2007 #4 V valiant360 Well-Known Member Joined May 5, 2007 Messages 89 Reaction score 0 Location north east oklahoma B&M makes the flexplate you need. Look at jegs or summit they probably carry them.
May 28, 2007 #5 R razorback Well-Known Member Joined May 20, 2007 Messages 171 Reaction score 0 ok i found it on mancini for a little cheaper than jegs, havent checked summit yet. thanks guys.
