[FOR SALE] small block turbo cam, m90 supercharger, header flanges

[moturbopar]

Custom Howards hydraulic cam custom cround for a turbo aplication.
Specs are 226 at .050 intake and exhaust, 114 lobe seperation on a 110 ic. Lift is .525 int and exhaust with a 1.5 ratio rocker, .560 with 1.6 rockers. Cam is new in container. $145

I also have a low mile M90 supercharger from ford supercoupe. Very very clean.
$250

Have 1/2 thick small block header flanges. new bought for turbo headers. $60

 

[moturbopar]

Will sell cam for $130
Supercharger $200
Flanges $50

 

[moturbopar]

Cam $125
$175 for the supercharger
$45 for the flanges.
Also have pro comp rpm intake New $130

 

[RogerK]

The supercharger has me curious. Can you post a picture?

 

[540slant6]

M90 is a small roots style blower. The supercoupes are 3.8 litre so the blower is perfect for a slant build. I've seen them on slants at Carlisle before. Nice little units.

 

[MagicMan]

I wonder how well the blower would work on a 273 v8 ?

 

[71Scamper]

I wonder how well the blower would work on a 273 v8 ?

It would work great for a 273 designed for low end power. It probably would stop breathing though at higher rpms.

 

[pishta]

That supercharger woukd pull hard on a 273 with a 2.76 rear as they would never get past 4500 rpm anyway. Might need to overdrive it a bit, do your math.

 

[moturbopar]

if overdriven the supercharger can make about 330 to 350 hp. It would work well on a mostly stock 273 or a low rpm 318. It is rated upto 5l engine. I think it would work awesome on a slant six though.

 

[1972orangebeast]

Still have cam available?