Spark Plug wires with headers

-
I use 8mm MSD, just changed from Jacobs which I had on for many years. Cars got Hooker fenderwell headers. Both these plug wires at the plugs conform to the angle when you first drive the car.
 
I have Accel 8.8 wires with the multiangle boots. I bend the boots for 5 & 7 to 90 degrees and route the wires under the header tube so they don't get cooked be snaked between the #3 tube and the head.
 
What DGC said for most of the time. Currently, I'm useing a old set of MP wires, made by Taylor. The 5 & 7 wires have sleaves to protect them from the header. Wire looms hold the wires away from the header tube. The boot angle is straight and there short on the Taylors/MP wires. Otherwise, 90* boots work well.
 
You must log in or register to reply here.
-

Back
Top