[WANTED] Stainless corners for lockstrip on 67 Barracuda Notch

[jagsdtc]

I need 1 lower corner stainless trim for my lockstrip on the rear windshield of a 67 Notchback Barracuda.
Does anyone know if there is a straight trim to cover the seam at the top of the rear windshield?

 

[barracudakid]

I have OEM top left and right lock strip
They are curved like the 68
Stainless

 

[4spdragtop]

Are you talking the top corner when you say "straight trim"? I think the top lockstrip is 1 pc from side to side, so top corners would have stainless.

I need 1 lower corner stainless trim for my lockstrip on the rear windshield of a 67 Notchback Barracuda.
Does anyone know if there is a straight trim to cover the seam at the top of the rear windshield?

 

[jagsdtc]

Here is what I have on the Notch...
I have one lower corner and need one more for the other side. It is not a 90 degree but an obtuse angle corner piece. I also am wondering if there is a straight connector for the top center where the 2 pieces meet.