Steering Quickeners???

[IfItsGotWheels]

Here's a question I"ve been wanting to ask for a long time. Instead of faster ratio pittman arms, has anyone tried to use a Steering quickener?
http://www.howeracing.com/Steering/Index-Quickener-Quickener.htm
Can this be made to fit a 67 Barracuda w/power steering?

 

[RedFish]

If it were made for mopar it might be worth a try but shaft diameters and spline counts are all different. There isn't space available for all the adapters you would need.

 

[mod5v]

We use those on our dirt race cars and they are great. But''' on a A body with power steering I don't think u will have the room to fit it in with the stock steering column. If you have column shift and headers I don't see any way but if u have a floor shifter u may be able to modifi a column enough to fit it in there.
If u have the time I would find a spair column to cut up and see what could be done.
I know on our race cars once u drive one with a quickner u don't ever want to be without one.

 

[340duster]

As the other guys have said, it would be difficult to do because of the length of the quickener plus the add adaptors you would have to build. Not impossible, but difficult and alot of fabrication would be required. And they do work well in dirt track cars!