Stock Fuel Pump to AN fittings

[straightlinespeed]

I would like to run braided stainless line with AN fittings from my stock 360 fuel pump to the carb. Problem is I cant find a fitting for the 1/2-20 outlet of the fuel pump to change it to AN. Have any of you guys ever done this or converted to something else?

 

[sireland67]

I used this hooked to a 5/16 hard line that screwed into the pump.
I can take a pic if you need it.

http://www.summitracing.com/parts/ear-165056erl

 

[sireland67]

Here is a pic.

 

[straightlinespeed]

Perfect! That will work great for what I want to do! Thanks

 

[67Dart273]

Actually I'm pretty sure that some of the specialty outfits make that adapter. It is properly called out by the tube size, not thread size.

If it's originally 5/16 steel tube, it's properly called "5/16 (or no5) inverted flare"

(The AN / JIC ? hose/ fitting numbering system is based on 16's of an inch)

A very quick Gargoole found this, 5/16 inverted no #6. You do have to be careful to stay with AN or JIC, and NOT "SAE" flare

http://www.sweetperformance.com/product/index.php?act=viewProd&productId=265