Rusty's guide?
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Oh crap I will be nice!
Yup Uhmhum what you said!Subaru repair manual??
Unconventional
Well-Known Member
Funny memory here. When I was workin' at the rock farm up north from here the winters were a lot different than here. I was runnin' a skip loader up there, had a cab on it but no heater. Windshield frost up overnight, inside and out. I kept a can of starter fluid behind the seat. 1 squirt into the air cleaner box, hit the starter switch, turn the can upside down and use the bottom of the can to scrape the frost off the windshield
Not good Fred . Stay warm my friend !
Got me beat by 1° It's 19 here.
Yup. I kept an ice scraper hanging from the rear view of my 42 Jeep to scrape the inside of the windows
Ben Drinkin
Hey bartender!
I cut the bottom out of 2 bbl and welded in a 4 bbl bottom from a cheap aftermarket for my Scout. Worked perfectly..
Not yet, but that could be very soon.
After driving a bunch this summer and fall I realized its a must have because of backing out of places, so
Women take the men along for the roller coaster ride.
So, it was cool to be off the Wi-Fi grid and out in Indian country for a few days, where you get no reception for anything. But equally happy to have it back. Here are some pics from our trip to the UNESCO World recognized area of Bai Tu Long Bay.
A Little cooler up North here.....Whoa whoa whoa
Is that a fur hat and overcoat?
Are you wearing a jacket??
FISHYPETE
Well-Known Member
I should put mirrors on my 64. It doesn’t even have drivers side
I have the twin post, gasket kit and a template along with the Nutsert set .. I'm just hesitant to make holes in the door
FISHYPETE
Well-Known Member
My car is low mileage and almost all original and I like it that way. But hard to turn my neck back like I used to
FISHYPETE
Well-Known Member
Poor guy, can’t even go ice fishing
I take muscle relaxers for my problem.
Last edited:
I have the advantage of a convertible
I was disappointed in the twin post. It is quite small. Just guessing that it is a 4 1/2" and the regular mirrors are 5". Ya, a half inch isn't much. (that's what she said) I've got plenty of holes. (in my drivers door) LMAO
Oh really, so it didn't have a required drivers side mirror? That's strange
that was my thinking, didn't want to put holes in my door, but safety and knowing I almost hit a wheel barrel backing out on the passenger side helped make my decision, after paint I don't want that to happen, so I figured I need the holes before I paint.
I honestly never seen one with out at least a drivers side rear view mirror..hmm
Blood thinners and ibuprophen are a bad mix, ibuprophen is an anti-coagulent. I could end up in a really bad situation if i cut myself.
-
