Stop in for a cup of coffee

-
Morning!
Clear start to the day. Maybe another cruise to red deer. Wifes niece is a massage therapist. So, go get beat up. Maybe. She may have jury duty. Who knows how long it will last.
 
It's Monte Carlo Monday!

1750079319442.png


Good morning :steering:
 
Made it to my first stop today, then to the grocery store for some fresh Crisp apples and laundry detergent. Another day in the life on memike

20250616_084919.jpg
 
Morning everyone, Final push today as movers show up tomorrow. Still have to move things they won't touch, welding tanks and such. Still need to move the horses and hay down plus one more car.
 
I love the smell of Mopar gear oil in the Morning..( Think Apocalypse Now ). Walk into the shop this morning and that's all I smell. Mopar gear oil. Going to try and blast the backing plates and rebuild the wheel cylinders today. I also tightened up my blast cabinet with a new set of gloves and some new media.
PXL_20250615_214525413.MP.jpg
PXL_20250615_214512573.jpg
PXL_20250615_194354294.jpg
 
Grumbles of thunder and a nice little shower. I ran some errands this morning but have some running to do this afternoon. I am getting a few things crossed off my list. Looking in the Layson's catalog. I will call Rick later with an order. I need to get that turn signal switch ordered and installed so my brake lights work. No reason to get pulled over by the fuzz! I am working on weatherstrip now. Curious if it can be installed in the vent window frame without taking the whole frame out of the door.
 

toolmanmike said:
Grumbles of thunder and a nice little shower. I ran some errands this morning but have some running to do this afternoon. I am getting a few things crossed off my list. Looking in the Layson's catalog. I will call Rick later with an order. I need to get that turn signal switch ordered and installed so my brake lights work. No reason to get pulled over by the fuzz! I am working on weatherstrip now. Curious if it can be installed in the vent window frame without taking the whole frame out of the door.
Click to expand...
Not sure if I got the right seal figured out but if it's the one for the door window that fallows down the track to hold and seal the glass as you roll it up and down. (if that makes sense)
Yea you can just roll the window down and stuff that felt molding down as far as you can on the track then hold it and roll the window up some and push down on the molding as you roll the window down. Few times like that and it should work.
 
Frodee said:
Not sure if I got the right seal figured out but if it's the one for the door window that fallows down the track to hold and seal the glass as you roll it up and down. (if that makes sense)
Yea you can just roll the window down and stuff that felt molding down as far as you can on the track then hold it and roll the window up some and push down on the molding as you roll the window down. Few times like that and it should work.
Click to expand...
It's the U shaped seal that goes in the long channel.
1750106153810.png


20250616_153650.jpg
 
You must log in or register to reply here.
-
Back
Top Bottom