Stop in for a cup of coffee

-
Buddy said 3-1/2” of rain in the last 24 hours. Ditches look like spring runoff. Water laying everywhere. Some more to come.
 
Tooljunkie said:
Buddy said 3-1/2” of rain in the last 24 hours. Ditches look like spring runoff. Water laying everywhere. Some more to come.
Click to expand...
Back in June of 2008, we had 11 inches of rain in less than 7 hours. Dams broke, Cities flooded
 
dukeboy_318 said:
Back in June of 2008, we had 11 inches of rain in less than 7 hours. Dams broke, Cities flooded
Click to expand...
I’m not blaming global warming. Im wondering about the 10,000 aircraft continuously flying around in the atmosphere though...
 
Mopar Tim said:
1967 318. Has a Crane energizer cam, flowmaster mufflers, duel 2 inch exhaust, stock manifolds. 273 4bbl intake and correct 273 AFB carb. 904 casting heads...swirl port style...
CRA-150052 Cam and Lifters Hydraulic Flat Tappet Adv. Duration 272/272 Lift .454/.454 Mopar 273 318 340 360, Installed 4 degrees advanced...
Click to expand...

That sounds like a good combo... :thumbsup:

I've run Crane cams in the past and been very happy with them... They make a good cam... :D
 
Tooljunkie said:
Buddy said 3-1/2” of rain in the last 24 hours. Ditches look like spring runoff. Water laying everywhere. Some more to come.
Click to expand...

We've had some rain on and off earlier...

Now steady rain and they predict on and off rain overnight and through the day tomorrow with flash flood warnings... :popcorn:

I got all my shopping done for the week yesterday and today and have plenty of food to stay in for a couple of days...
 
There's a dam fly hanging around here...
up2.gif


I'm gonna get that sum of a *****.... :mob:
 
Car Guy Scott's '63 Falcon Convert, first showing at Farmington Block Party Car Show yesterday 9-21-19.

20190921_192851.jpg


20190921_193006.jpg


20190921_173229.jpg


20190921_173128.jpg


20190921_173347(0).jpg


Cool gas pedal, 260 V8, 4 spd, 8 1/4 rear.
 
They are out there. No one wants them any more. All over the place around here. If they don't work usually just seals you can get at almost any hydraulic supply store.
 
Seals???


I went out clubbing with a Canadian friend of mine, but we couldn't find any seals.... :( :rolleyes:
 
Not supposed to be raining, but it is...
Buddy really wants to get shed done.
 
Morning boys !!
Looking for another busy day here. A little painting tail panel and deluxe chrome wheel covers.
Also chasing a charging issue which John has narrowed down. Fun stuff, I'm learning a lot!!
 
You must log in or register to reply here.
-

Back
Top