Super charged 360

[1973dusterkid]

Ok I am mostly just leaning and seeing what I can do.

I was planing on building a 500hp 500fttq 408 stroker
I then got looking at super chargers with a roots supercharger a blower could I make 500hp 500fttq with a street freindly boost.

360 with a high lift cam alum heads and 8.0 8.5 comp or so.

What would be my tq cure you think and what rpm for most power I really dont want to race but kicking it side ways on the road rolling burnouts and stuff like that.


Anyone used these
http://www.superchargerusa.com/chrysler_bk_street.htm#360chyrs

 

[Cudafever]

looks like a lot of fun!!!!!
Think you will need a big hole for the super charger and carb(s)

I thing you could make 500 hp with the 360 you already have.
I Have no experience on these, just taking out my butt

 

[Abodybomber]

A Rootes blower packs cylinders QUICKLY. Highly would recommend at least forged blower pistons (7.0 to 8:5 to 1 compression),good new rods,and a rebalance. Probably a wider lobe center cam. Coyote Jack setting one up as we speak. Might check out his thread. Blowers are bitchin'but way costly.

 

[rumblefish360]

Your torque curve would be high and flat with a steep climbing HP line. How it will look would depend on the parts used. Properly built engines for superchargers run big bucks.