Squigly1965
Member
- Joined
- Jul 26, 2009
- Messages
- 17
- Reaction score
- 0
there is some type of vacuum plunger attached to the end of the intake manifold. 2 bolts hold it on.
it's right below where the throttle linkage bracket bolts down
does this need to be active. can i just put a plate over the holes and call it good?
my current application doesnt have any need for this. so bypassing would be great.
here's some pics of where i'm talking about
and thanks for any help here
[/img]
it's right below where the throttle linkage bracket bolts down
does this need to be active. can i just put a plate over the holes and call it good?
my current application doesnt have any need for this. so bypassing would be great.
here's some pics of where i'm talking about
and thanks for any help here
![DSC00946.jpg](http://i699.photobucket.com/albums/vv351/ChrisDuda/DSC00946.jpg)
![DSC00950.jpg](http://i699.photobucket.com/albums/vv351/ChrisDuda/DSC00950.jpg)