[WANTED] Super Six Setup

[JOHN BOWMAN]

Thank you for your help in advance. Looking to add a little power to my slant.

I have a '87 D150 w/ 225 slant, 3.21 gears 8.25" rear and 904A tranny. Looking to add a super six setup to it. Need the entire setup in running shape including linkages please. If you have have dutra headers or similar I may be interested as well. Looking to plug and play. I'd be highly interested in pictures and how vac lines run if I need to change that from factory 225 setup.

Cleaner w hoses
2 barrel carb
2 barrel cast intake
Linkages
Adapter plates if necessary

Shipping to 29920.... I have an exhaust manifold so that's not necessary just the intake components please.

 

[el5dart]

ive got a super six setup. it'le be friday before i can get a good look at it to tell you what i got.

 

[JOHN BOWMAN]

ive got a super six setup. it'le be friday before i can get a good look at it to tell you what i got.

Thanks very much. I appreciate any help I can get brother. I've done as much research before posting as I could, and have my factory manual but no super 6 I take info in the '87 one... so ..i'm kinda going blind. Still have smog stuff on mine too... need the smog pipe block off circle they used to sell too. Not the egr one.

 

[el5dart]

heres what i got. its complete. needed a fuel pump when i bought it but ran good no smoke pouring gas in the carb. sorry for the lighting. its indoors and dark. its in a 74 dart.

 

[JOHN BOWMAN]

heres what i got. its complete. needed a fuel pump when i bought it but ran good no smoke pouring gas in the carb. sorry for the lighting. its indoors and dark. its in a 74 dart.

View attachment 1715189753 View attachment 1715189754

What are you looking to get for the whole intake setup, linkage and all? Shipped to 29920?

 

[el5dart]

i dont know what do you think. anything i can recoup out of the dart i bought for parts would be good. id like to drop the whole k member out and sell motor tranny k member in one shot actually. it would be less wrenching on it that way. you dont need the whole shebang do you?

 

[JOHN BOWMAN]

i dont know what do you think. anything i can recoup out of the dart i bought for parts would be good. id like to drop the whole k member out and sell motor tranny k member in one shot actually. it would be less wrenching on it that way. you dont need the whole shebang do you?

No unless you want to sell it to me for a few hundred and deliver it to SC too hard to ship the whole package. But someone would snag it ..i'm sure. I wish I could.

 

[el5dart]

im pressed for time and work nights. give me till after the 4th of july week to get what you need out of it. give me a list of exactly what you need too. im not sure what you mean by linkage? do you mean transmission linkage and throttle cable? think of a fair price for the stuff. and shipping will be what it is no more no less. hope i dont put you behind on your project.

a few hundred would work for motor, tranny, k member minus brakes, spindles, uca just jump in your truck and come get it. ain't no way i can drive to SC.

 

[JOHN BOWMAN]

im pressed for time and work nights. give me till after the 4th of july week to get what you need out of it. give me a list of exactly what you need too. im not sure what you mean by linkage? do you mean transmission linkage and throttle cable? think of a fair price for the stuff. and shipping will be what it is no more no less. hope i dont put you behind on your project.

a few hundred would work for motor, tranny, k member minus brakes, spindles, uca just jump in your truck and come get it. ain't no way i can drive to SC.

Yes i mean throttle, kick down, intake, carb, breather basically that whole intake setup. Where are you located? Also what year is the motor forgot to ask. ..i'm trying to go into a '87 so just want to make sure it will all jive. And ..i'm in no rush. My truck runs an drives and it's summertime, I like to work on it in the winter, its about 115 outside today.