Supercharged 6.4L in a 64 Valiant

[Chuckbizkits]

Damn! another paint jail victim

Not paint. Just getting stripped. I will do the paint and body myself.

 

[Chuckbizkits]

I can't use the factory plastic valve cover covers because the super charger is in the way. The aluminum covers that come with the kit won't work because they will interfere with the master cylinder. I made a little adornment for the VC.

 

[Chuckbizkits]

 

[75slant6]

View attachment 1715017915
View attachment 1715017916
View attachment 1715017917

That looks killer!!

 

[70blackfish]

That looks killer!!

NICE........

 

[Tincup]

Looking Good.....Just an FYI, I do have a power rack in mine, no issues with fitment.

 

[Chuckbizkits]

Looking Good.....Just an FYI, I do have a power rack in mine, no issues with fitment.

Thanks Tincup. Bill at RMS said no way. No biggie, I'm running EPAS.

 

[Quickrunner]

Awesome build!

 

[Chuckbizkits]

Boost gauge. The idea of the super charger came late in the game, after the dash was done. I'm going to run a boost gauge and mount it on the pillar trim.

 

[Chuckbizkits]

 

[rapidtransitric]

Fantastic build

 

[Chuckbizkits]

With the NAG1 Transmission a signal must be sent to the ABS module. Need to install a tone ring and wheel sensors to the transmission yoke.

 

[Chuckbizkits]

 

[rapidtransitric]

Tell us more. Did you have that made?

 

[Chuckbizkits]

The sensors need to be between .030 and .050 from the tone ring. I made some set screws to fine tune it.

 

[Chuckbizkits]

Tell us more. Did you have that made?

Hot Wire makes the tone ring. The sensors are Mopar.

 

[rapidtransitric]

Ok cool thanks

 

[famous bob]

Ok cool thanks

unbelievable talent here !

 

[Chuckbizkits]

Finally got the car back from media blaster and etch primer shop. Zero rust. Body is very straight. Only a couple of minor dings. Won't take much to get it laser straight.

 

[Chuckbizkits]

There are no tail light bezel to body gaskets available for a 1964 Valiant so I'm going to try and make them fit perfectly without a gasket.

 

[rapidtransitric]

Nice

 

[75slant6]

Caulk? Or gonna weld em in?

 

[75slant6]

Finally got the car back from media blaster and etch primer shop. Zero rust. Body is very straight. Only a couple of minor dings. Won't take much to get it laser straight.

And suddenly a lot of people (including myself) don't like you.

 

[Chuckbizkits]

Caulk? Or gonna weld em in?

Neither. Just bolt in like factory but no gasket.

 

[75slant6]

Not worried about leaks?