if you're gonna move the car with the engine out, I'd just go ahead and drop the trans out, its only a couple more bolts and 10-15 minutes of workMaybe a dumb question, does the transmission need to be held up with a jack if the motor is out? Need to move the car around with motor out.
Thanks I'll try that, engine is out and trans is held up with a floor jack currently.Put a bellhousing bolt(the bolts that mount the tranny to the back of the engine) on each side of the trans get a piece of pipe or a broom handle and place in under the 2 bolts between the frame rails,have done this numerous time rebuilding repair engines..
Thanks I'll try that, engine is out and trans is held up with a floor jack currently.
My thoughts exactually. Kim
My thoughts exactually. Kim