[WANTED] swinger body molding retainers (clips)

-
Status
Not open for further replies.
WA71swinger

WA71swinger

Well-Known Member
Joined
Jul 11, 2011
Messages
96
Reaction score
0
Location
Eastern Washington
Rating - 0%
0   0   0
Contact seller
71' swinger. molding runs the length of car. Someone walked by and the front fender molding caught on their cloths and pulled off. I have been to many body/paint/etc. shops trying to find a suitable replacement. Pics attached. Black clip is original? If not original works very well. White clip is best replacement found but piece is not secure with this clip (waiting for it to fly off any day). Have searched all online fastener shops with no luck. 71' parts catalog lists part numbers for molding retainers as 6002 922 (6), 6000 709 (2) 9420 867 (2). Also, For whatever reason I have holes beneath my rear seat windows for an emblem. I assume it is for 1970 dart swinger emblem even thought I have the swinger emblem on the front fender. Would be interested in emblems to fill these holes as well if anyone has them. Any help would be appreciated. Thanks, David
 

Attachments

  • IMG_04101.jpg
    19.3 KB · Views: 129
  • photo 1.JPG
    80.4 KB · Views: 153
  • photo 2.JPG
    84.9 KB · Views: 123
  • photo 3.JPG
    74.4 KB · Views: 140
the word DART with 2 holes on quarter panel

Mr G's had some FA 423 that I used years ago - still have ziplock bagie
 
j061093409 said:
the word DART with 2 holes on quarter panel

Mr G's had some FA 423 that I used years ago - still have ziplock bagie
Click to expand...

looking for 'DART" emblems it is then. Thanks.

Googled Mr. G's and FA 423. Got nothing related. Are you referring to clip/retainers. If so would you part with a few? How much shipped?
 
j061093409 said:
the word DART with 2 holes on quarter panel

Mr G's had some FA 423 that I used years ago - still have ziplock bagie
Click to expand...

Found the website. Did not see those (fa 423 listed). They had some listed as original part number matching dodge parts catalog. Did not look the same (no hole in middle for stud to slide/lock onto). Were listed as discontinued. Sent them an e-mail. Hope to hear back sometime soon. Thanks again for the info. Worst case scenario I will have to make something.
 
I believe it is six, I would have to remove the molding again to check. I'm afraid to break the only remaining original one that is actually holding it on until I have a replacement that looks like it will work (by comparison to the old one).
 
I should have added. These are 9/16" tall measuring the flaps that slide into the molding x 15/16" long (length probably wont matter as much as long as they lock onto the studs and hold the molding to the body).
 
WA71swinger said:
71' swinger. molding runs the length of car. Someone walked by and the front fender molding caught on their cloths and pulled off. I have been to many body/paint/etc. shops trying to find a suitable replacement. Pics attached. Black clip is original? If not original works very well. White clip is best replacement found but piece is not secure with this clip (waiting for it to fly off any day). Have searched all online fastener shops with no luck. 71' parts catalog lists part numbers for molding retainers as 6002 922 (6), 6000 709 (2) 9420 867 (2). Also, For whatever reason I have holes beneath my rear seat windows for an emblem. I assume it is for 1970 dart swinger emblem even thought I have the swinger emblem on the front fender. Would be interested in emblems to fill these holes as well if anyone has them. Any help would be appreciated. Thanks, David
Click to expand...

Still looking for these clips or any that would work. Any help would be appreciated. I would hate to have one of these fly off while driving. See thread above for picture of clip.
 
Status
Not open for further replies.
-

Back
Top