TERMINAL RELEASE?

[B'cuda]

Hey all, 69 barracuda, replacing the turn signal switch - what's the catch to getting the wire's terminals to release from the connector?

 

[BigBlockMopar]

Usually you depress a tiny lip from the back of the connector which releases it.

 

[GeorgeH]

These help. Think Horror freight has some also. Or sometimes a dental pick
https://www.tooltopia.com/lisle-577...C90i3_-JLlMIB4XlNZFjXOesi5-T7pHoaAnciEALw_wcB

 

[famous bob]

These help. Think Horror freight has some also. Or sometimes a dental pick
https://www.tooltopia.com/lisle-577...C90i3_-JLlMIB4XlNZFjXOesi5-T7pHoaAnciEALw_wcB

I used a very small screwdriver.

 

[67Dart273]

Just sayin in my opinion those older TS connectors are a really poor design. Did you find a source of the pins?

 

[B'cuda]

Just sayin in my opinion those older TS connectors are a really poor design. Did you find a source of the pins?

The turn signal switch comes with the wires with the correct pins on them but no connector block so you can fish the wires through the steering column. Funny, previous owner had been here too, wires are cut n spliced with tape so I want to change that.