The sound of my new cam!

[Mopar to ya]

My 318 with it's new Comp Cam XE268H. Sounds great!
[ame="http://www.youtube.com/watch?v=GK0c6FUfpc8"]http://www.youtube.com/watch?v=GK0c6FUfpc8[/ame]

 

[crackedback]

Nice...

If it were mine, I might turn the idle up just a smidge.

Should be a nice runner.

 

[Bad Sport]

Nice...

If it were mine, I might turn the idle up just a smidge.

Should be a nice runner.

I agree, seems a tad on the low side. Where do you have your initial set?

 

[Old Tired Rebel]

Sounded good.

 

[slant6/4speed]

Seem to idle fine-what lifters are you running?

 

[Badart]

Yep idle is too low, but sounds great.

 

[mopardude318]

sounds good man! i think i shoulda put that one in my 318, instead of the edelbrock perf. RPM cam....

 

[Old Tired Rebel]

The color is that Lemon Twist or Curious Yellow?

 

[Mopar to ya]

I am having trouble finding the timing mark. Something is out of whack. I timed it by ear so far. Idle is 750 rpm. Should be good. Going to post another question now since the **** has now hit the fan. Having big trouble. Check for it and see what you think.

The color is Sublime. The PO had the seats done and the door panels accented in it as well. You can see the seats in the video.

 

[Mopar to ya]

Seem to idle fine-what lifters are you running?

I used the lifters in the cam kit. I just ordered the XE268H kit from Jegs and all the FelPro gaskets from a buddy of mine at O'reilly Auto here in my little home town.

 

[Tony Fields]

Soundin good and lookin good

 

[TexasStroker]

Can't beat a 268 in a 318!

 

[Abodybomber]

Sounds good, keep tweaking it.Sweet ride.

 

[dodge freak]

I am having trouble finding the timing mark. Something is out of whack. I timed it by ear so far. Idle is 750 rpm. Should be good. .

If that was my cam I would keep the idle higher for the first few hundred miles till the cam is fully broken in.

If you wanted a "badder" sounding cam should have went up one size or got their Thumper cam.