Thermo Quad gasket

[dancinwulf]

I had my TQ rebuilt last year and am finally ready to put it on my 340 what is the best gasket set up to use. I live at fairly high altitude 6000 ft. I only drive it during the summer so was wondering what the best spacing and gasket set up would be between carb and manifold?

 

[340fourspeedDuster]

FWIW, I would use either the 1/8" thick or NO MORE than the 1/4" tall carb gasket at your elevation.

 

[rumblefish360]

If you can't find a stock gasket, you may have to search on out through the rebuild kits. The aftermarket normally has them as a 1-16 of an inch thick. Not good. It will jam up the choke rod.

 

[Marcohotrod]

use a stock 1/4" thick gasket. like a McCord 66-0144 or fel pro 60273

 

[dancinwulf]

use a stock 1/4" thick gasket. like a McCord 66-0144 or fel pro 60273

 

[dancinwulf]

Thanks I appreciate the guidance