'Time to Show Em' Tuesday
- Thread starter gagembassett
- Start date
-
68 dart conv
Well-Known Member
- Joined
- Oct 18, 2009
- Messages
- 170
- Reaction score
- 264
390 in my 66 Cuda
Curious Duster
Well-Known Member
1971 340
dano
Evil Handy Man
Show'em Tuesday, but on a Wednesday!!!
My 72's 340, .060 over, cast crank (I spit at forged!) neutral balanced, 70-down spec TRW forged Pistons fly cut to zero deck, Scat H-Beam rods, Ported Weiand Stealth intake, Ported Speed Master heads (before they we're cool) with 2.05/1.60 valves, and a probably too small for the Combo 703 VooDoo Hydro cam tied to a TKO 600 with Mcleod clutch and SFI flywheel.
The Cheesy PCV valve is replaced with a Wagner dual flow.
My 72's 340, .060 over, cast crank (I spit at forged!) neutral balanced, 70-down spec TRW forged Pistons fly cut to zero deck, Scat H-Beam rods, Ported Weiand Stealth intake, Ported Speed Master heads (before they we're cool) with 2.05/1.60 valves, and a probably too small for the Combo 703 VooDoo Hydro cam tied to a TKO 600 with Mcleod clutch and SFI flywheel.
The Cheesy PCV valve is replaced with a Wagner dual flow.
Super-Cuda
MOPAR .. Move Over, Plymouth Approaching Rapidly!
Kendog 170
Let the boy go !
Opps! Got a good point there.
dano
Evil Handy Man
Hump was removed (factory 4 speed car) and I replaced that side with an auto patch panel and the top sheet supplied. My kit was made buy Hurst that is no longer available but they still sell the mounts and tunnel patch panel piece. The Torsion bar Hoop has to be cut out to fit it. They sent a cut template that I still have along with the directions, and could share it. We sub framed the car first then cut the hoop.
Hurst 67520001 Hurst Transmission Crossmember & Floor Brace for 1967-1976 Mopar A-bodies
Hurst 69520001 Hurst Tunnel Patch Mopar TKO/TKX
This outlines what I had to do.
Install Overview: Hurst Driveline Conversions Tremec TKO Kit for 67-76 Mopar A-Body
dano
Evil Handy Man
I was making fun of the Lego Movie's Taco Tuesday that became "Freedom Friday, but on a Tuesday!"
ragtopfury
Well-Known Member
360 that is replacing the 318 in my Shelby Dakota. Because I can.
chrgdrt
Well-Known Member
340 6 pac in my challenger
416 4 bbl in the same
360 4bbl in my 67 barracuda conv.
And the same 360 getting a make over
416 4 bbl in the same
360 4bbl in my 67 barracuda conv.
And the same 360 getting a make over
Wow!!!
Jeff Seighman
aka jeffnmo
Looks like it just rolled off the show room floor.
thesiren74
Well-Known Member
That thing is nasty!
440”, R3 block, Indy heads, solid roller. Pump gas street car under construction.
furrystump
Well-Known Member
- Joined
- Nov 13, 2004
- Messages
- 2,103
- Reaction score
- 1,700
Topless69
Well-Known Member
What kind of carb is that in the Swinger?
I'm thinking my engine stand has about 425 HP
doogievlg
Well-Known Member
What gauge is mounted to your cowl?
Cuda Al
Well-Known Member
How about some OEM love.
Alan
Alan
-
