Bigdummy
Not a Nova
I need a new one with a advance.My old one brokeded.what have youse guys had good luck with?
Could we get a translation from New England to englishWe all us guys used ah crapsmen timming lite wid advensed dual
Cornhole tools .what brand timing light did you have. I have a sears from the 70-80s and it had a bad solder joint. fixed it and it is still running today!
If you are serious about accuracy I wholeheartedly agree. A marked balancer or timing tape will get you there. Many street cars though have power steering and possibly a/c and often you can't see 45° before when you're checking your total. When on the tool truck I sold a ton of the dial advance Actron lights to stock car guys. They would usually tape the dial so it wouldn't move and total time the engine. Their total timing according to the dial on the light was just a number as long as it was set the same every time. Change something in the engine, change the total and lock it in.The problem with the dial back lights reading incorrectly is...... you don’t know that’s whats happening.
It might be showing the correct timing.......might not be.
For something that matters, I use a plain non-dial back light.
So which brand Rusty?
Dwell meter. Got one of those myself. It was my dads. I used it all the time when i was a kid. Always set dwell first. Then timing
Dwell meter. Got one of those myself. It was my dads. I used it all the time when i was a kid. Always set dwell first. Then timing