Torsion Bars...

[dusterboyy440]

Alright so on my torsion bars one of them has 888 and the other has 889...does that mean they are diffrent torsion bars?? Also one has a L and one has a R after the numbers..does that stand for left and right?

 

[dazedduster]

one number if left side, and the other is right. should also have a L & R stamped on the end

Sorry did finish reading the post. even #'s & odd #'s depict left or right

 

[dusterboyy440]

yea i saw the L and R on the ends...does that stand for left and right? if so wat would the drivers side be..left or right?

 

[71DartGuy]

drivers side should be left and an odd number. Pass side should have an even number followed by an "R"

 

[player1up]

does anyone have the number to diameter cross reference? for example the 890 and 891 bars are .810 right? those are the ones I have in my /6 duster and the rate is too fast with the front sitting a little low.

 

[71DartGuy]

It's late but I'll try anyway
890 and 891's - 0.85" slant six
892 and 893's - 0.87" most v-8's and /6 with a/c
894 and 895's - 0.89"

 

[player1up]

thanks dartguy, thats what I was looking for, I was a little confused while looking for .890 torsion bars and finding 890R and 891L bars, I have even seen people selling ones on evilbay that say 890R V8 bars.