[WANTED] Transmission cooler line fittings
- Thread starter GSS
- Start date
-
Triple Dart
Member
Try your local hardware store
GSS
Well-Known Member
I tried the hardware stores, Menards, 2 transmission shops, all the local parts stores, and the only salvage yard around here.
Triple Dart
Member
You can get from auto parts stores also summit
GSS
Well-Known Member
You must have better parts stores than my local Napa, Autozone, and O'Reilly's.
Summit is out stock (PN BLF-134B) but AGS appears to have them but they don't have the nut as far as I can tell and they haven't picked up the phone or responded to email.
Triple Dart
Member
dorman Compression fitting 785-306 Summit # RNB785-306
You should be able to go a good hardware store and purchase a 5/16 copper tubbing compression fitting to splice tubing together. That would give you compression nuts and compression sleeves you need. The radiator and the transmission should be 1/8 NPT with a #5 an type fitting. You might try the section that has fittings for gas lines. They are brass
Summit # AER FBM2513
You should be able to go a good hardware store and purchase a 5/16 copper tubbing compression fitting to splice tubing together. That would give you compression nuts and compression sleeves you need. The radiator and the transmission should be 1/8 NPT with a #5 an type fitting. You might try the section that has fittings for gas lines. They are brass
Summit # AER FBM2513
Last edited:
Triple Dart
Member
GSS
Well-Known Member
The Dorman nuts are 1/2"-24 thread. I need 1/2"-20. I guess I failed to mention this is a restoration so the Aeroquip and Earl's stuff is out. Thanks for taking the time. You wouldn't believe the time I have put into trying to find this stuff.
Pm your address and I will send you them. Have some on cores with the fittings and tubing nuts still on them. Our snow is all gone so it's a good time.
I also have a some if needed.
-
Similar threads
