Tube bending

[MERIDIAN]

Hey guys, anyone have a tube bender or know of a place that can bend some tube for cheap? I have 3 pieces 5' ea. of round 1-1/4 /.065 t.s. They all get bent the same on ea end with a 3.5-4.5 r at 80 degrees with a 4" leg or so. I have a cad drawing and have accounted for the material at the bend so all should be straight forward.

As always thanks for the help.
Joe

 

[inkjunkie]

If you are near Apache Junction might want to try ADD

 

[hemitheus]

I had a friend use ADD for his jeep bars. Did good work.

 

[inkjunkie]

I had a friend use ADD for his jeep bars. Did good work.

Jared is a good guy. His Dad is my transmission buddy.

 

[hemitheus]

What area of the EV are you in? I am on Meridian & Southern just behind the American Legion.

 

[inkjunkie]

What area of the EV are you in? I am on Meridian & Southern just behind the American Legion.

Was this for me?? If so I am not there anymore. I used to live between Brown & University. 80th St. was right behind us. If you go down 80th St. look for the place with a garage right on the fence line, I was right next to him.

 

[hemitheus]

it was yes.