I cut my valve covers along the runners 20 years ago to clear the intake. It’s on the backside and I don’t think anyone has ever noticed. I use metal core (moroso or Mopar performance I forget which) gaskets because they’re reusable and sealed much better than anything I tried over the years. To me the MP covers are still the best looking and have aged well. No intention on selling. Good luck!
Valve cover fitment issue with RPM Air gap intake
- Thread starter Moparman485
- Start date
-
TXOval
340 stroked to 416
The 1646 gaskets are connected by a metal strip between the two cork pieces.
I use studs as well…just easier no matter what gaskets you use
I use studs as well…just easier no matter what gaskets you use
The "doubled up" Felpro 1646 gaskets work well with the MP valve covers and Air Gap intake. I tried the Morso rubber gaskets first and could not get them to seal properly. My Felpro's have been on for 4 years now w/o any issues. I went with longer bolts, tried studs and they just kept coming loose.
-
Similar threads
