RAMM
Well-Known Member
Putting up for sale a fairly serious topend package. Would like to sell as a whole--may consider parting. Asking $4k CDN.
Fully ported Victor Pro-Comps used on my 2013 EMC entry. 466cubes=755hp/655 tq. Flowed 357cfm at the time. 2.250" x 5.35" Hollow Stem Ferreas, 1.810 Manley SD. Ports are 1.460" x 2.230" approx". Heavily angle milled 12.75 degree valve angle 48cc , relocated dowels +.100" . These heads will require a freshening and some Re-epoxy work to be perfect again. Very little run time on them. Everything in the pics. T&D rockers 1.6/1.6, Indy Single 4150, port matched, shortened ARP head bolts. J.Rob
Fully ported Victor Pro-Comps used on my 2013 EMC entry. 466cubes=755hp/655 tq. Flowed 357cfm at the time. 2.250" x 5.35" Hollow Stem Ferreas, 1.810 Manley SD. Ports are 1.460" x 2.230" approx". Heavily angle milled 12.75 degree valve angle 48cc , relocated dowels +.100" . These heads will require a freshening and some Re-epoxy work to be perfect again. Very little run time on them. Everything in the pics. T&D rockers 1.6/1.6, Indy Single 4150, port matched, shortened ARP head bolts. J.Rob
