[SOLD] w2 2.08x1.60 valves springs retainers and locks

-
Status
Not open for further replies.

modart440

Well-Known Member
Joined
Aug 22, 2007
Messages
725
Reaction score
68
Rating - 80%
4   1   0
Contact seller
Set of 8- 2.08 intake long stem valves & 8 -1.60 long stem exhaust valves. Valves are Ferrea 6164 intake & Ferrea 6147 exhaust. They are 11/32 or .34 diameter. Overall length is as best I can measure 5 3/16's .And dual springs good for 650 lift. Titanium retainers with locks. Used but all in excellent condition. 150.00 US plus shipping. Located near Toronto ,Ont Canada

20161205_175205.jpg


20161205_175606.jpg


20161205_175627.jpg


20161205_175606.jpg
 
Last edited:
So they are 5/16 stems or 11/32????

Also, can you post up the over all length?

I'm interested. Just want to be sure what I'm buying.

Also, shipping to 98942 in the USA.

Thank you.
 
I'd guess they are 11/32" and neck down to 5/16" below the guide.
 
If those cam out of the Econo W2's from the Dart you should check the length..... I dont recall using .100 overlength.... and if so those springs are Comp Solid Roller springs to match a .638 304ish solid roller... Titanium retainers were from Comp as well if I remember correctly...
 
Status
Not open for further replies.
-
Back
Top