[SOLD] W2 Aluminum Batten Heads w intake and roller rockers

[Howie]

I traded on these heads to go on my altered dart. However my stack injection unit has oval ports and I do not want to alter these, so I am going to let them go and use my oval port steel W2 heads.
The last pick shows the roller cam spec that this motor was built with. My friend whom I got these from is going supercharged hellcat conversion. I have the cam roller lifters and pushrods if interested. I do not know what these flow but can see that the pushrod holes have been moved and filled professionally. $3500 located in Broken Arrow Ok

 

[Pacer72]

I guess shipping to Compton CA wont be cheap?

 

[RustyRatRod]

@SS Lancer Chris, looks like somethin you might want.

 

[Howie]

I guess shipping to Compton CA wont be cheap?

heads are 25 lbs and intake is about the same. Not sure on the rocker assembly weight. Will be in LA for christmas and possibly bring one cyl head on the flight.

 

[SSG_Karg]

Was the intake port matched to the heads? If it is still oval port I would be interested in it if you would separate.
Pm me if so. Thanks.

 

[Howie]

Was the intake port matched to the heads? If it is still oval port I would be interested in it if you would separate.
Pm me if so. Thanks.

attached the view from the port side. It is a W2 bolt pattern and matches the heads but not oval port

 

[SS Lancer]

@SS Lancer Chris, looks like somethin you might want.

Thanks Hoss
I just got home from PA last night had picked up a new set of Edelbrocks John worked over
For me !!!

 

[Garrett Ellison]

What brand are the rockers and are they included?