[SOLD] W5 topend

[Mgc340]

Nice W5 topend

Start up time Only

W5 heads

Mopar M1 intake manifold

Norris 1.6 ratio rockers

Polished sheet metal valve covers

Bronze roller distributor gear

MSD distributor



New W5 headers 1 7/8 with 3 inch collectors equal length for A-body



I don’t know what the springs are good for lift wise. Very little time on this stuff and it was all new before being put together. Very un molested stuff. The heads just have some blend port work is all.



I can ship on a pallet via Fastenal for probably $150 though out the lower

$3500

 

[famous bob]

Nice W5 topend

Start up time Only

W5 heads

Mopar M1 intake manifold

Norris 1.6 ratio rockers

Polished sheet metal valve covers

Bronze roller distributor gear

MSD distributor



New W5 headers 1 7/8 with 3 inch collectors equal length for A-body



I don’t know what the springs are good for lift wise. Very little time on this stuff and it was all new before being put together. Very un molested stuff. The heads just have some blend port work is all.



I can ship on a pallet via Fastenal for probably $150 though out the lower

$3500

View attachment 1715408187

View attachment 1715408188

View attachment 1715408189

View attachment 1715408190

View attachment 1715408191

View attachment 1715408192

View attachment 1715408193

View attachment 1715408194

View attachment 1715408195

Not a small block guru, and haven`t paid much attention to them, except the ones that haul *** .
They seem to be easier to hook up than a r/b monster, unless on a tubbed car .
Do those headers fit an A body ?
Which engine would be best suited for these , 340, 360 or a stroker ?

 

[Mgc340]

Not a small block guru, and haven`t paid much attention to them, except the ones that haul *** .
They seem to be easier to hook up than a r/b monster, unless on a tubbed car .
Do those headers fit an A body ?
Which engine would be best suited for these , 340, 360 or a stroker ?

Yes the headers fit the A-bodies. These heads will work great on a 340 up to a stroker just depending on what you want to do. They can make 700 hp pretty easy on a stroker small block

 

[blown hemi bee]

Do the w5 have the blue plugs or with out thanks

 

[Mgc340]

Do the w5 have the blue plugs or with out thanks

With out these are the first generation. The whole blue plug thing is a myth. There were a lot of bad w5 with and with out blue plugs. They had major porosity issues. These have been check and pressure tested. These are a good head. Some of the W5’s when your really poet them they turn into sprinklers. Some of the best w5 heads I’ve ever owned have not had the blue plugs.

 

[rumblefish360]

Truth!!!!!

With out these are the first generation. The whole blue plug thing is a myth. There were a lot of bad w5 with and with out blue plugs. They had major porosity issues. These have been check and pressure tested. These are a good head. Some of the W5’s when your really poet them they turn into sprinklers. Some of the best w5 heads I’ve ever owned have not had the blue plugs.

 

[Mgc340]

If anyone is interested in the top end with out the headers I'd sell it for $3,000 with out the headers. Thanks