Wanted W2 1.5 rockers

-
Status
Not open for further replies.
I just picked up a set of W2 econos, and am wondering if the BB offset rockers are the same as the W2's. It looks like the W2 econos with pedestal use a slightly longer tip to adjuster length than the race/nonpedestal version. Does someone here know the centerline of the shaft to the adjuster, and the CL to the roller distance? I would like to compare them to some BBM offset rockers I have. Not trying to steal the thread, just looking for an option. I saw a brand new set of rockers that cost 2x's what I gave for the heads and intake I just bought.
 
harland sharp says the offset on w2 rockers is .775

harland sharp also shows the same part number for individual rockers for w2 econo and w2 race heads.
 
I'm looking at the http://www.tdmach.com/mopar.html chart.


8002 W-2 W-5 Race w/5.350" valves rocker arm length length 1.450
8005 W-2 W-5 Race w/5.140" valves rocker arm length length 1.520

.070 difference between regular and long valve race head rocker arms, as well as different part numbers. Note that the std length valve W2 and the BB rockers are the same length. BB wedge vs SB wedge. The BB ProComp rockers use a .650 offset...and I'm thinking the offset could possibly be shimmed, or not...since the SB shafts are shorter.
 
Status
Not open for further replies.
-

Back
Top