West Coast Help Please..

-
Status
Not open for further replies.

Inertia

Well-Known Member
Joined
Feb 4, 2011
Messages
5,987
Reaction score
3,468
Location
Victoria B.C. Canada
Rating - 100%
2   0   0
Contact seller
Hey All,... I'm coming down I-5 from Canada to Vegas Feb. 28th weekend, for the Nascar race , and am hoping to find some parts along the way...

For a 69 Swinger 340, I'm looking for....

- 51 1/2" large joint driveshaft, centre to center u-joint, preferably
4spd/8 3/4, but ends don't really matter. gotchathnx

- 883 - 4spd trans, gotcha thnx

- Centerforce clutch, and stock flywheel. gotcha thnx

- 1 pair of exhaust manifolds, casting#2863553 #2863549 pending thnx

- nice grill

headlite bezels. gotcha thnx

- front hood trim

- front bumper supports, front and rear bumpers, in great shape.

- shift lever, boot, and chrome ring.

- descent dash and radio bezel.

Thanks very much, all help appreciated.... grant

THANK YOU WEST COAST and FABO.... most parts accounted for,, Starting Trek South today... First stop clutch in Tacoma.. later..cheers
 
Hey All,... I'm coming down I-5 from Canada to Vegas Feb. 28th weekend, for the Nascar race , and am hoping to find some parts along the way...

For a 69 Swinger 340, I'm looking for....

- 51 1/2" large joint driveshaft, centre to center u-joint, preferably
4spd/8 3/4, but ends don't really matter.

- 883 - 4spd trans,

- Centerforce clutch, and stock flywheel.

- 1 pair of exhaust manifolds, casting#2863553 #2863549

- nice grill, and headlite bezels.

- front bumper supports, front and rear bumpers, in great shape.

- shift lever, boot, and chrome ring.

- descent dash and radio bezel.

Thanks very much, all help appreciated.... grant
I have a Bell housing sb ( cast iron ) 1967 date code A833 trans very nice inside and shifter from a 1965 Dart gt with all arms and levers shift has reverse lock out on the handle and shifter boot. But I'm in Tucson Az and all parts are going to swap meet 3-4 thru 3-6
 
you should skip the nascar race wait 2 more weeks and go to the spring fling in van nuys.
 
If you check the Seattle craigslist, there are two 833 for sell. Both are for a bodies.
 
Hey folks, thnx much.. 340jam, thnx anyway, but not what I'm looking for...
chrisf-- retiring next year, and if I can get some of these parts, I'll see you in Van Nuys next year.. Planning MATS too,,

1970Duster,, thnx much, I found them, and going to call Mon..

REALLY need the driveshaft.. any help???
 
I have a new in the box Centerforce clutch. It's part #DF269739. I am 20 minutes from I5 as you go through Tacoma. PM me for a price.
 
i have 340 exhaust manifolds put alittle far from vegas open a p.o.box at boarder ups store or something like that have them shipped there pick up on the way back or have shipped to hotel if staying in one can send pictures they are very nice
 
please send pix,, and how much?? do they still have heat riser... please have pix showing casting numbers.. thnx much ...
 
I have a driveshaft that is 51 inches from end to end, not counting the slip yoke. Not sure if that would work for you. I am about 30 minutes east of I-5 in the Sacramento area.
 
THANX WESTCOAST AND FABO.. most part accounted for,, trip starts today,, First stop Tacoma for the Clutch.. later .. cheers..
 
Stopped in Seattle, picked up clutch from Commando66, and picked up flywheels in Lancaster Calif from Ed Walsh, don't know his Member name, and picking up a driveshaft from "mike" in Reno, next week, a trans in Snohomish, on the way home.. THNX FABO
 
Status
Not open for further replies.
-
Back
Top