What carbs go with this 2x4 intake?

[dartfastback]

Received this intake and want to have carb recommendations. Figger a mostly stock engine build. 383 ps cam. Any pics of an original setup from early 1960's. Was thinking of using small cfm like 2x400. A new carb would be easier to get ,than finding older. Mostly like the look of the 2 4's over making big power. Drivabilty a must. Thanks

 

[Salty Dog]

A pair of 400's would be great, super throttle response and 800 CFM on a wide open throttle run. What could be better? IDK, Brand new 400's maybe? To bad there not made that small anymore. SO, if you get "NEW" carbs, Edelbrock 500's will have to do. Just take the time to jet it correctly. IMO, the AVS style carb is the best for this.

From the Edelbrock site;

#1803/#1804 are calibrated for dual-quad applications and factory equipped with: Metering Jets - Primary .086, Secondary .077; Metering Rods - .065 x .057; #1804: Primary .086, Secondary .077; Metering Rods - .065 x .052; Step-Up Spring - orange (5" Hg).

Everything else for this set up can be gotten from Edelbrock as well. Linkage, fuel lines, air cleaner, tuning kit.

 

[Badart]

I have a carter Afb 400 for sale right now. It came from a running car and I cleaned it out. http://www.forabodiesonly.com/mopar/showthread.php?t=180684 There is a second matching one on ebay right now here http://www.ebay.com/itm/150771724807?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_500wt_715

 

[Salty Dog]

HOLY CRAP!!!

Jump on this!!!!!!!!

I've been around long enuff that BADART is a good fella.

 

[Mrmopartech]

Do you want tot do this,this is a offenhauser intake with 2 X4 using 2 500 cfm carbs from a 273HP motor,mrmopartech

 

[Salty Dog]

Are you selling that or just a demonstration with it?