what engine do i have

[robs 67plymouth]

anybody please i have this 65 dodge flatbed in backyard went out to get numbers 7-7-65 #2658930 anybody know wat this engine is heads have same # to. has 4 speed is bellhousing worth takin for my valiant thanks everybody

 

[440valiant]

Is the distributor in the front or back?

 

[robs 67plymouth]

Is the distributor in the front or back?

sorry bout that its a big block , has a big water pump housing on it to

 

[440valiant]

sorry bout that its a big block has a big water pump housing on it

Not by the numbers but my guess is its a 440, as most big dodge trucks have 440's. I would defiantly put it in your valiant!

 

[bayyum]

so would i!

 

[GTXperience]

I'm going to guess it is either a 361 or a 383.

 

[daredevil]

i was thinking 361 also with the small carb

 

[godfatherofchry]

x2 on the 361 its worth takeing

 

[physixx]

My guess is a 361. When did the 383 come out?

Ken

 

[godfatherofchry]

x2 on the 361 its worth takeing

ya know that could even be a 413 or even 426 wedge they used alot of those up in the Baker driveway trucks how big of a truck is it.

 

[GTXperience]

My guess is a 361. When did the 383 come out?

Ken

The 383 was introduced in '59 and came out for the '60 model year.

 

[Longgone]

Yup, 1965 361.

 

[demon seed]

I have checked through 3 different sites to find a block casting# that ends in 930 and no luck so the hell if I know but if I had to guess, 361.

Terry

 

[robs 67plymouth]

http://www.stockmopar.com/mopar-engine-casting-numbers.html

this site shows its a 361 also its a dodge 600

 

[intimidator]

http://www.stockmopar.com/mopar-engine-casting-numbers.html

this site shows its a 361 also its a dodge 600

They also had a tall block 383 back then that came in trucks. Check the distributor length.

 

[bOb shingler]

see if it has the flat pad just to the right of the distributor, that will tell you if it's a "B" or "RB" and should have the cubic inch on it if it's a "RB".