What rockers are these

[69DARTS]

What rockers are these
The pushrods are cupped
Just asking cause i dont knoe

 

[toolmanmike]

Probably Crane's or Isky. The bodys have been machined for lock nuts.

 

[Rocket]

Crane. Their kit with shafts used springs to keep the rockers apart.

Same as these

 

[69DARTS]

Crane. Their kit with shafts used springs to keep the rockers apart.

Same as these

View attachment 1715775021 View attachment 1715775022

Thank u

 

[69DARTS]

Probably Crane's or Isky. The bodys have been machined for lock nuts.

Thank u

 

[69DARTS]

Thank u

 

[RustyRatRod]

If they're Crane, they'll have CRANE cast right into them somewhere. Crane, Isky and Erson all three made almost identical rocker setups. Plus, there's the possibility they are modified factory 273 rockers. It really doesn't matter as any of the four are all about equally good. This is what a Crane rocker will look like.

The Isky rockers have a machined pad on them like this...and say ISKY.

The ones in post #3 look like Erson rockers to me. That appears to be the old Erson logo. Crane ductile rockers are plain on top and have CRANE cast into the bottom.

 

[69DARTS]

If they're Crane, they'll have CRANE cast right into them somewhere. Crane, Isky and Erson all three made almost identical rocker setups. Plus, there's the possibility they are modified factory 273 rockers. It really doesn't matter as any of the four are all about equally good. This is what a Crane rocker will look like.
View attachment 1715775049
The Isky rockers have a machined pad on them like this...and say ISKY.
View attachment 1715775050
The ones in post #3 look like Erson rockers to me. That appears to be the old Erson logo. Crane ductile rockers are plain on top and have CRANE cast into the bottom.

Thank u