Rbob Well-Known Member Joined Mar 2, 2009 Messages 511 Reaction score 39 Location Olympia, Washington Apr 11, 2014 #1 I thought it was for attaching fuel line from pump to carb but may be on rear of bell housing for reverse light wires. What do you guys think? Attachments P4110338.jpg 39.5 KB · Views: 220
I thought it was for attaching fuel line from pump to carb but may be on rear of bell housing for reverse light wires. What do you guys think?
66340SEDAN FABO Member #3649 Joined Nov 20, 2006 Messages 29,309 Reaction score 50,471 Location Minnesota Apr 11, 2014 #2 I have seen those on the lower stud of the master cylinder on manual brake cars before..............
buckshotbishop Old Soul Joined Nov 26, 2012 Messages 439 Reaction score 34 Location atascadero, ca Apr 12, 2014 #3 i found those all over the place in my 69 valiant
68hemidart2000 Well-Known Member Joined Nov 9, 2013 Messages 61 Reaction score 2 Location Iowa Apr 12, 2014 #4 I've seen this on the back of alternators to hold the wire harness to the alternator
RustyRatRod I was born on a Monday. Not last Monday. FABO Gold Member Joined Jun 7, 2010 Messages 105,430 Reaction score 103,458 Location Georgia Apr 12, 2014 #5 It is for the flux capacitor wiring harness.
d55dave Well-Known Member Joined May 20, 2010 Messages 2,585 Reaction score 1,132 Location Kelowna, British Columbia Apr 12, 2014 #6 I think that I have seen it a few times on one of the upper bolts that hold the tailshaft to the main transmission case, both automatic and four speed, to hold the back up light wiring.
I think that I have seen it a few times on one of the upper bolts that hold the tailshaft to the main transmission case, both automatic and four speed, to hold the back up light wiring.
Rbob Well-Known Member Joined Mar 2, 2009 Messages 511 Reaction score 39 Location Olympia, Washington Apr 12, 2014 #7 RustyRatRod said: It is for the flux capacitor wiring harness. Click to expand... The winner! Looks like it can go anywhere, I wont sweat it too much. Thanks for the replies!
RustyRatRod said: It is for the flux capacitor wiring harness. Click to expand... The winner! Looks like it can go anywhere, I wont sweat it too much. Thanks for the replies!