Where to find correct front polygraphite sway bar bushings?

[LovetheA's]

I’m in the process of replacing my front factory sway bar bushings with the PST replacements I ordered and discovered they are too big. I measured my front sway bar keep in mind factory 67 383 gts. It measure roughly at .870 inches thick. My polygraphite PST replacements have an inside diameter of roughly .940 inches. Basically these bushings will flop around on my sway bar. Anybody know if I was just given the wrong ones or if you can order varying size polygraphite replacement bushing from PST or another source?
Carl

 

[LovetheA's]

This is the replacement. Just too big.

 

[toolmanmike]

Did you contact PST?

 

[Demonic]

You have the B body ones, which are a 15/16 o.d. bar, most A bodies are 7/8. Should be able to see the specs on Energy Suspension's website. Yup, you got the wrong ones. Exchange or sell them to a B body guy.

 

[LovetheA's]

Thank you for the responses. I ordered the correct ones from PST.