Which oil pan for 360 ?

[Too Many Projects]

The basket case Demon I'm working on was a 6. The owner bought a 360 for it and I think it's from a truck. Here's a pic of the pan. I've been told this won't fit. SO, my question is.....what pans will fit the 360 AND the '72 Demon 6 cylinder k member ?

He doesn't want expensive aftermarket pans. We're trying to find a stock pan to use.
Thanks !

 

[hollywood hig]

u need a 360 center sump pan, which in that picture looks like the one...... i'd have to look at mine when i get home to verify, but i'm pretty sure that's the one.....anyone else chime in on this??
higgs

 

[1970 La]

that is a car oil pan the pickup used a rear sump

 

[Locomotion]

You have the correct pan. Only question "might" be the center steering link clearance. I've never had to mess with it, but there has been some debate about replacing a straight slant 6 center link with a "dropped" V-8 version to keep it from rubbing on the V-8 pan.

 

[grumpuscreature]

You have the correct pan. Only question "might" be the center steering link clearance. I've never had to mess with it, but there has been some debate about replacing a straight slant 6 center link with a "dropped" V-8 version to keep it from rubbing on the V-8 pan.

Not an issue on a '67 up A body, the center links were the same whether slant or V8. That oil pan should work.

 

[Too Many Projects]

Thanks guys. By rough measuring it looked like it should work but I wasn't sure.
I can take that off the the "need" list...\\/

 

[oldkimmer]

............Is there a # on the pan.........it looks 2 b 2 deep, like out of a bus.....or motorhome....kim.........