duster731
young gun
Ok so I have stumbled across an issue..
I bought this Wilwood kit for my 73 duster
Wilwood Disc Brakes 140-11023 Wilwood Forged Dynalite Pro Series Front Disc Brake Kits | Summit Racing
but I am running 70’s B body spindles on the car part#3402638. Now the issue I have stumbled on are the Wilwood caliper mounting brackets, they do not work with the b body spindles. What are my options at this point? Will I have any other issues? I am also adding Qa1 uppers and all brand new suspension parts.
Another issue I foresee is where the Qa1 upper mounts on the left side (pictured below) the tube rides the frame wall and there is also a decent gap in between the bushing and the frame wall. Should I just grind it down so the tube does not touch that area?
I bought this Wilwood kit for my 73 duster
Wilwood Disc Brakes 140-11023 Wilwood Forged Dynalite Pro Series Front Disc Brake Kits | Summit Racing
but I am running 70’s B body spindles on the car part#3402638. Now the issue I have stumbled on are the Wilwood caliper mounting brackets, they do not work with the b body spindles. What are my options at this point? Will I have any other issues? I am also adding Qa1 uppers and all brand new suspension parts.
Another issue I foresee is where the Qa1 upper mounts on the left side (pictured below) the tube rides the frame wall and there is also a decent gap in between the bushing and the frame wall. Should I just grind it down so the tube does not touch that area?