Wilwood Master Pushrod?

[ermarccio]

I have a 68 Barracuda with auto trans and manual brakes. Doing the full Wilwood disc conversion with Wilwood master cylinder. With the Wilwood master, what pushrod works? I see one from Dr. Diff, but I don't see how the rod will stay in the master (the grommet diameter is too little). I bought the one from Mancini racing, but it way too long and doesn't stay in the master. Anyone use the Wilwood master successfully?

Thanks,
Eric

 

[ermarccio]

Solved: Contact RMS and buy their Wilwood kit or you can buy just the MC pushrod adapter that's the correct length, works with the Wilwood MC and has the right size bolt hole for the stock brake pedal bolt.

Here's the link to RMS: 7/8 Bore Aluminum Master Cylinder Kit, 62-76 A-body

 

[roccodart440]

While you are in there I'd recommend you buy an offset master cylinder bracket. Makes life a lot nicer under the hood and looks good too.

 

[68HAVOK]

I needed this info as well! Thanks FABO members!