Windlace

-
S

sorewrist1

FABO Gold Member
FABO Gold Member
Joined
Mar 18, 2012
Messages
352
Reaction score
71
Location
Sac Cal
I put on the windlass molding and the top doesn't look right. Am I missing molding od have it assembled wrong. This is a 71 swinger

20230318_142233.jpg


20230318_142227.jpg
 
I installed a set from C.I. just last week. I had to trim some of the rubber to make it fit better (it overlapped at the vertical post on the vent window). Just make sure the mounting hooks line up with the holes in the door and you'll be golden.
 
SF_Ripper said:
I installed a set from C.I. just last week. I had to trim some of the rubber to make it fit better (it overlapped at the vertical post on the vent window). Just make sure the mounting hooks line up with the holes in the door and you'll be golden.
Click to expand...
It's not really the windlace. My problem is with the panel that you screw in that the fuzzy attaches to. It just looks unfinished
 
Aahaa the problem I'm having is with the rear upper inner window panel. The metal one. It just doesn't look finished. Do I have it together wrong?
 
Has anyone got a picture of their windlace and how it ends up at the top of the door jam? thanks. Jim
 
You must log in or register to reply here.
-

Back
Top